Allcopy System 2 dongle
For the Allcopy System 2 diskcopy program.
| D23M (Amiga side) | D23F (disk drive side) | ||
|---|---|---|---|
| 1 | Disk Ready | 1 | = |
| 2 | Disk Read Data | 17 | Disk Write Data |
| 3-7 | Ground | 3-7 | = |
| 8 | Disk Motor Control | 8 | = |
| 9 | Select Drive 2 | 16 | Disk Write Enable |
| 10 | Disk Reset | 10 | = |
| 11 | Disk Removed From Drive | 22 | Disk Index Pulse |
| 12 | +5 Volts DC | 12 | = |
| 13 | Select Disk Side | 13 | = |
| 14 | Disk is Write Protected | 14 | = |
| 15 | Drive Head position over Track 0 | 15 | = |
| 16 | Disk Write Enable | n/c | |
| 17 | Disk Write Data | n/c | |
| 18 | Step the Head-Pulse | 18 | = |
| 19 | Select Head Direction | 19 | = |
| 20 | Select Drive 3 | 20 | = |
| 21 | Select Drive 1 | 21 | = |
| 22 | Disk Index Pulse | n/c | |
| 23 | +12 Volts DC | 23 | = |
Wiring from backside view of connectors.
Schema by Lauri Lindholm.
Picture from original dongle by Peter Saarinen.
Source: sfnet.atk.amiga newsgroup
[Back]